Fibaro Flood Sensor

Description

FIBARO Flood Sensor is a universal, Z-Wave compatible, flood, and temperature sensor. The device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening an NC contact.

The device has a built-in temperature sensor, monitoring the temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has a built-in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode, or the Z-Wave network communication range.

In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.

FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending an alarm signal in case of substantial inundation of water.

Main features:

• Compatible with any Z-Wave Controller
• Compatible with any Z-Wave or Z-Wave+ Controller (firmware 3.2 or higher)
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
• May be connected to any alarm system (potential free output terminal)
• Extremely easy installation – simply put on a surface prone to flooding
• May be installed anywhere – flood sensor’s contacts extended with a wire
• Battery or VDC powered. When connected to an external, 12/24V DC power source, the battery serves as an emergency power source
• Theft protection – tilt is reported to the Z-Wave network or alarm system’s main controller
• Two operating modes – flood/temperature sensor or just a temperature sensor.
• Alarm is signaled by sound, visual indicator (LED diode) and Z-Wave

Technical data:

Power supply: Battery or 12–24V DC supply (LPS or NEC class 2)

Battery type: CR123A/CR17345 battery, 3.0V DC

Power consumption (at VDC operation): 0.4W

Output terminals maximum current carrying capacity: (ALARM NC, TAMP NC) 25mA

Maximum voltage at output terminals: (SMOKE NC, TAMP NC)24V DC / 20V AC

EU standards compliance: RED 2014/53/EU; RoHS 2011/65/EU

Radio protocol: Z-Wave; Z-Wave+ (firmware 3.2 or higher)

Radio frequency: 868.4 or 869.8 MHz EU; 908.4 or 916.0 MHz US; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU;

Radio transmit power: up to -5 dBm (EIRP)

Range: up to 50 m outdoors; up to 30 m indoors; up to 40 m indoors (firmware 3.2 or higher)(depending on terrain and building structure)

Operational temperature: 0°C to 40°C – battery powering mode; -20°C to 70°C – VDC powering mode

Measured temperature range: -20°C to 100°C

Temperature measuring accuracy: 0.5°C (within 0 – 40°C range)

Dimensions (diameter x height): 72 x 28mm